List of Publications:
In journals:
34) Joanna Bauer, Md Nazmul Hoq, Agnieszka Migasiewicz, John Mulcahy, SAM Tofail, Fahmida Gulshan, Christophe Silien, Halina Podbielska, , Md. Mostofa Akbar
Automatic identification of different Stages of cellulite from non-contact infrared thermographic images, Submitted.
33) Md. Rakibul Qadir and Fahmida GULSHAN, Reclamation of Lithium Cobalt Oxide from Waste Lithium Ion Batteries to be used as Recycled Active Cathode Materials. Materials Sciences and Applications, 2018, 9, 142-154
32) Hossain Abul, GULSHAN Fahmida, and Kurny Abu Syed Wais, Tensile and Impact Properties of Aged Al6 Si0.5MgxCu (x=0, 0.5, 1, 2 and 4 wt %) Alloys. In: Saleem Hashmi (editor-in-chief), Reference Module in Materials Science and Materials Engineering.; 2017. pp. 1-10. Oxford: Elsevier.
31) Khan Mamun Reza, ASW Kurny and Fahmida GULSHAN, “Parameters affecting the photocatalytic degradation of dyes using TiO2: A review”, Journal of Applied Water Science., DOI 10.1007/s13201-015-0367. ISSN 2190-5487 Volume 7 Number 4, July 2017, Springer.
30) Md. Saiful Alam, Fahmida GULSHAN, Qumrul Ahsan, Martine Wevers, Helge Pfeiffer, Aart Willem van Vuure, Lina Rocio OSORIO Serna, Ignaas Verpoest, “Development of Methodology to assess the Failure Behavior of Bamboo Single Fibre by Acoustic Emission Technique” Journal of The Institution of Engineers (India): Series D. 98(1), 9-17, Springer,2016.
29) Abul Hossain, M. A. Gafur, Fahmida GULSHAN, A. S. W. Kurny, Effect of Cu content on the Electrochemical Corrosion Behavior of Peak-aged Al-6Si-0.5Mg Alloys in Sodium chloride Solution, Rajshahi University Journal of Science & Engineering,ISSN 2309-0952 Vol. 44: 29-35, 2016.
28) A. Hossain, Fahmida GULSHAN and ASW Kurny, “Studies on tensile properties at various strain rates and corrosion behaviour of peak aged Al-6Si-0.5 Mg (0.5Cu) alloys”, IIUM Engineering Journal, Vol. 17, No. 2, 2016.
27) S.K.Pinky; Ferdush Ara ; A.S.W.Kurny ; Fahmida GULSHAN,“Photo Degradation of Industrial Dye Using ZnO as Photo Catalyst.”, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 4, Issue 10, October 2015.
26) A. Hossain, Fahmida GULSHAN and ASW Kurny, “Electrochemical corrosion behavior of Ni-containing hypoeutectic Al-Si alloy.”, Journal of Electrochemical Science and Engineering, 2015, DOI: 10.5599/jese.174
25) Khan Mamun Reza, ASW Kurny and Fahmida GULSHAN, “Photocatalytic degradation of Methylene Blue by Locally Available Magnetite”, International Journal of Environmental Science and Development, Vol.7., No.5, May 2016.
24) A. Hossain, Fahmida GULSHAN and ASW Kurny, “Effect of 0.5wt% Cu Content on the Electrochemical Corrosion of Heat Treated Al-6Si-0.5Mg Alloy in Simulated Seawater”, Journal for Electrochemistry and Plating Technology, DOI: 10.12850/ISSN2196-0267 JEPT3995.
23) Abul Hossain, Md. Abdul Gafur, Fahmida GULSHAN and A. S. W. Kurny, “Electrochemical Investigation of the Corrosion Behavior Heat Treated Al-6Si-0.5Mg-xCu (x=0, 0.5 and 1) Alloys”, Journal of Electrochemical Science and Engineering. Vol. 5, No. 1, March 2015, pp.1-8 [doi: 10.5599/jese.2015.0070].
22) Fahmida GULSHAN and Kiyoshi Okada “Preparation of alumina-iron oxide compounds by coprecipitation and gel evaporation methods and their characterization” Journal of Engineering Research ,Vol. 3, No.(2), pp 1-8, June 2015.
.
21) SMK Nazrul Islam, ASW Kurny and Fahmida GULSHAN “Degradation of Two Commercial Dyes in Aqueous Phase using Mill Scale by photo-Fenton Process”, Environmental Processes, Vol 2, No. 1, pp 215-224, 2015[Springer]
20) M. Jalal Uddin, Fahmida GULSHAN and ASW Kurny, Effect of Home and External scrap on the Mechanical Properties of Recycled PVC: A Comparative Study, Journal of Mechanical Engineering and Sciences, Volume 8, pp 1261-1274, 2015.
19) Raisul Alam Shawon, Fahmida GULSHAN and ASW Kurny, “Effect of Welding Current on the Structure and Properties of Resistance Spot Welded Dissimilar (Austenitic Stainless Steel and Low Carbon Steel) Metal Joints”, Journal of The Institution of Engineers (India): Series D, DOI: 10.1007/s40033-014-0060-6 [Springer].
18) A. Hossain, M. A. Gafur, Fahmida GULSHAN, A. S. W. Kurny, “The Effects of 2wt% Cu Addition on the Corrosion Behavior of Heat Treated Al-6Si-0.5Mg-2Ni Alloy” International Journal of Chemical, Nuclear, Metallurgical and Materials Engineering, Vol:8, No:7, pp.659-663, 2014.
17) A. Hossain, Fahmida GULSHAN and ASW Kurny, “Electrochemical Investigation on the Corrosion Behavior of Combined Addition of Cu and Ni to Al-Si-Mg Alloy in 0.1M NaCl Solution”, Journal for Electrochemistry and Plating Technology, pp 1-10, December 2014, DOI: 10.12850/ISSN2196-0267.JEPT3947.
16) A. Hossain, Fahmida GULSHAN, ASW Kurny, “Electrochemical Investigation of Corrosion Behavior Heat Treated Al-6Si-0.5Mg-xCu(x=0, 0.5, 1, 2 & 4wt %) Alloys”, International Journal of Corrosion, Ref No.356752, pp 1-6, 2014, http://dx.doi.org/10.1155/2014/356752.
15) Fahmida GULSHAN and Qumrul Ahsan, Effect of heat input on the structure and properties of aluminium weldment TIG welded with 4043 filler rod, Chemical and Materials Engineering 2(2), 25-32, 2014.
14) Marzia H TANIA, ASW KURNY and Fahmida GULSHAN, Characterization of Bangladesh Sand for possible high-tech applications, Chemical Technology: An Indian Journal, 9(1), 27-31, 2014.
13) Sheik Md. Kazi Nazrul ISLAM, ASW KURNY and Fahmida GULSHAN, Photocatalytic efficiency of mill scale for the degradation of textile dye by photo-Fenton and photo-ferrioxalate system under UV and sunlight, Environment and Ecology Research 1(3): 129-134, 2013.
12) U K Sultana, Fahmida GULSHAN, M A GAFUR and A S W KURNY, Kinetics of Recovery of Alumina from Aluminium Casting Waste through Fusion with Sodium Hydroxide, American Journal of Materials Engineering and Technology, Vol. 1, No. 3, pp. 30-34, 2013 [doi:10.12691/materials-1-3-1].
11)Fahmida GULSHAN and Kiyoshi OKADA, Preparation of alumina-iron oxide compounds by gel evaporation methods and its characterization, Materials Science: An Indian Journal, volume 10, issue 7, pp 277-286, 2014.
10)Fahmida GULSHAN and Kiyoshi OKADA, Preparation of alumina-iron oxide compounds by coprecipitation methods and its characterization, American Journal of Materials Science and Engineering, Volume 1 Issue 1 pp 6-11, 2013 [DOI: 10.12691/ajmse-1-1-2].
9) Banu T, Billah MM, Gulshan F, Kurny ASW, Experimental studies on fly ash sand lime bricks with gypsum addition. American journal of Materials Engineering and Technology. Vol 1 Issue 3 pp 35-40, 2013.
8) Fahmida GULSHAN and Qumrul Ahsan, Effect of heat input on the structure and properties of aluminium weldment, Iranian Journal of Materials Science and Engineering, Volume 10 No 2 pp 11-18 (2013).
7) Majharul Haque Khan, Fahmida GULSHAN and ASW Kurny, Recovery of Metal Values from Spent Zinc-Carbon Drycell Batteries, Journal of The Institution of Engineers’, India, Series-D: Metallurgical and Materials and Mining Engineering, April – September 2013[doi: 10.1007/s40033-013-0017-1] [Springer].
6) U K SULTANA, Fahmida GULSHAN and A S W KURNY, Kinetics of Leaching of Iron Oxide in Clay in Oxalic Acid and in Hydrochloric Acid Solutions, International Journal of Engineering and Emerging Technologies, Vol. 1, Issue 1, April – June, pp. 1 – 14(2012).
5) Farhana BEGUM, Fahmida GULSHAN and ASW KURNY, Reduction Behaviour of Different Size Fractions of a Low Grade Ilmenite, Chemical Technology – an Indian Journal Vol. 7 No 2(2012).
4) Fahmida GULSHAN, Sayaka YANAGIDA, Yoshikazu KAMESHIMA, Toshihiro ISOBE, Akira NAKAJIMA and Kiyoshi OKADA: Photodecomposition of methylene blue by iron-oxides in an oxalate solution; J. water research. 44, 2876-2884(2010) [Elsevier]
3) Fahmida GULSHAN, Yoshikazu KAMESHIMA, Akira NAKAJIMA and Kiyoshi OKADA: Preparation of alumina-iron oxide compounds by gel evaporation method and its simultaneous uptake properties for Ni2+, NH4+ and H2PO4-; J. Hazard. Mater. 169[1-3]697-702 (2009) [Elsevier]
2) Atsushi KOBAYASHI, Fahmida GULSHAN, Yoshikazu KAMESHIMA, Akira NAKAJIMA, Kiyoshi OKADA: Preparation and Simultaneous Ion Uptake Properties of CaO-Fe2O3-SiO2 Compounds; J. Ceram. Soc. Japan, 116[2]187-191(2008).
1) Fahmida GULSHAN, Qumrul AHSAN, Ehsanul HAQUE and ASMA HASEEB: Failure Analysis of Super-Heater Tube Supports of Primary Reformer of a Fertilizer Factory, Journal of Failure Analysis and Prevention , Volume 5(3)pp 67-72(2005), Publisher –American Society for Metals.
- b) Conferences (national and international conferences and seminars):
Articles published or accepted for publication in Proceedings of national and international conferences:
48) Upoma Saha1, Md. Afzal Hossain1 and Prof. Dr. Fahmida Gulshan, Making Non-fired Brick Using Locally Produced Induction Furnace Steel Slag, July 2019, RUET, Rajshahi
47) M R Chowdhury and Fahmida GULSHAN, Synthesis of Graphene oxide for textile dye degradation under various photocatalytic conditions, 19th World Textile Conference at Ghent, Belgium 11-15 June, 2019
46) Mamtaz R., Ahmed S., Noor I., Rahman S., Shams P. & Fahmida GULSHAN. (2019), ‘Generation of E-Waste and Its Future Trend in Bangladesh’, Proceedings of International Research Conference (IRC 2019), p. 655-660, June 11-12, Copenhagen, Denmark
45) K. M. Abu Hurayra – Lizu, S. M. Nazmus Shakib Pias, Fahmida GULSHAN Muhammad R. Islam GO based PVA nanocomposites: Tailoring of optical and structural properties of PVA with low percentage of GO nanofillers: International Conference on Physics – 2019, 07-09 February, 2019
44) P Shams, S Rahman, V C Saha, M Alam, S Ahmed, M Hasanuzzaman and Fahmida GULSHAN, Synthesis and Micro Hardness Properties of Ball Milled rGO Reinforced Aluminium Matrix Composite, SPPM 2018, BUET Dhaka, Bangladesh.
43) V C Saha, M Alam, P Shams, S Rahman, M R Qadir, M R Islam and Fahmida GULSHAN. Synthesis & Characterization of Reduced Graphene Oxide (RGO) Reinforced Polymer Matrix Composite, SPPM 2018, BUET Dhaka, Bangladesh.
42) Abul Hossain, Fahmida GULSHAN, ASW Kurny, Characterization of Tensile Properties in Thermal Modified Cu-Ni Content Al-Si Hypoeutectic Alloy under Different Strain Rates, ICMIME, RUET,2017.
41) Abul Hossain, Fahmida GULSHAN, ASW Kurny Effects of Heat Treatment on the Microstructure, Impact Toughness and Fracture Strength of Al-6Si-2Cu Cast Alloy, ICME 2017, BUET, Dhaka.
40) Abul Hossain, Fahmida GULSHAN, ASW Kurny , Effects of Heat Treatment on the Microstructure, Impact Toughness and Fracture Strength of Al-6Si-2Cu Cast Alloy, ICME 2017, BUET, Dhaka.
39)Md. Imran Noor, ASW Kurny, Md. Rakibul Qadir, M. A. Gafur and Fahmida GULSHAN, Recovery of Value Metals from Waste Lithium Ion Batteries by Hydrometallurgical Process, ICMERE 2017, CUET, Chittagong, Bangladesh.
38)Riad Morshed Rezaul, Raihan Atahar, Tahmeed Bin Tasnim,ASW Kurny, Rowshan Mamtaz, and Fahmida GULSHAN, Reuse of Induction Furnace Steel Slag as a Replacement of Coarse Aggregate in Construction Materials. ICMERE 2017, CUET, Chittagong.
37) Abul Hossain, M.A. Gafur, Fahmida GULSHAN, ASW Kurny, Tribological (wear) Properties of Cu/Ni/Cu-Ni Content Al-Si Hypoeutectic Alloys under Dry Sliding Condition, ICMIME, RUET,2017
36) Riad Morshed Rezaul, Raihan Atahar, Tahmeed Bin Tasnim, ASW Kurny, Rowshan Mamtaz, Fahmida GULSHAN Feasibility study of Bangladeshi Electric Arc Furnace Steel Slag as an alternative for conventional fine aggregate. ICME 2017, BUET,Dhaka.
35)Md. Imran Noor, ASW Kurny, Md. Rakibul Qadir, M. A. Gafur and Fahmida GULSHAN Characterization of Waste Lithium ion Batteries in the Process of Recovery of Value Materials, ICMIME 2017, RUET, Rajshahi, Bangladesh.
34) Riad Morshed Rezaul, Raihan Atahar, Tahmeed Bin Tasnim, ASW Kurny, Fahmida GULSHAN, Comparison of mechanical properties of induction furnace steel slag and Electric Arc Furnace Steel Slag as a replacement of Coarse aggregate in construction materials. ICMIME 2017, RUET, Rajshahi, Bangladesh.
33)Raihan Atahar, Riad Morshed Rezaul, Tahmeed Bin Tasnim, ASW Kurny, Fahmida GULSHAN, Comparison of Mechanical Properties of Induction Furnace Steel Slag and Electric Arc Furnace Steel Slag as a Replacement of Fine Aggregate in Construction Materials. ICMIME 2017, RUET, Rajshahi, Bangladesh.
32)Raihan Atahar, Riad Morshed Rezaul, ASW Kurny Md. Muktadir Billah, Rowshan Mamtaz and Fahmida GULSHAN ,Possibility of making non-fired Bricks from Induction Furnace Steel Slag and Electric Arc Furnace Steel Slag generated in Bangladesh. ICMERE 2017, CUET, Chittagong, Bangladesh.
31) M. B. Azim, I. A. Tanim, M. R. Islam, A.S.W Kurny and Fahmida GULSHAN, “ The Morphological and Optical Properties of Graphene Oxide-Tin Oxide ”, National Conference on Physics, Paper ID: CM-03, 5-7 January, 2017, Dhaka, Bangladesh. [Organized by Bangladesh Physical Society].
30) M. Bakhtiar Azim, Intaqer Arafat Tanim, Riad Morshed Rezaul, M. Mozammel Hosen, A.S.W Kurny and Fahmida GULSHAN, “Graphene-Oxide for Efficient Photocatalytic Degradation of Methylene Blue Under Sunlight and Its Kinetic Study”, The International Conference on Computer, Communication, Chemical, Materials and Electronic Engineering [IC4ME2 ], Paper ID: 12, 26-27 January, 2017, Rajshahi, Bangladesh. [Organized by Rajshahi University]
29) Abul Hossain, Fahmida GULSHAN, ASW Kurny Size of Non-Metallic Inclusions and Deformation Behavior During Hot Rolling in Medium Carbon Structural Steel. 3rd International conference on Advances in Civil Engineering [ICACE], Paper ID 26, 21-23 December,2016, Chittagong, Bangladesh.
28) Abul Hossain, Fahmida GULSHAN, ASW Kurny, Electrochemical Corrosion Behavior of Al-Si Hypoeutectic Alloy in Simulated Seawater Environment, 3rd International conference on Advances in Civil Engineering [ICACE], Paper ID 25, 21-23 December,2016, Chittagong, Bangladesh.
27) Abul Hossain, Fahmida GULSHAN, Md. Mohar Ali, ASW Kurny, Effect of 0.5wt% Cr Addition on the Mechanical Properties and Microstructure of Heat Treated Plain Carbon Low Alloy Steel, 3rd International conference on Advances in Civil Engineering [ICACE], Paper ID 27, 21-23 December,2016, Chittagong, Bangladesh.
26) M.Bakhtiar Azim, Intaqer Arafat Tanima, Riad Morshed Rezaul,, Rizwan Tareq, Arafat Hossain Rahula,, A.S.W Kurny and Fahmida GULSHAN, Degradation of Methylene Blue using Graphene oxide-Tin Oxide Nanocomposite as photocatalyst, 1st International Conference on Engineering Materials and Metallurgical Engineering[ICEMME] 22- 24 December, 2016, Dhaka, Bangladesh.
25) M.Bakhtiar Azim, Intaqer Arafat Tanima, Riad Morshed Rezaul,, Rizwan Tareq, Arafat Hossain Rahula and Fahmida GULSHAN, Synthesis of Graphene Oxide -Tin Oxide Composite for Photo catalytic Degradation of Dye, 4th International conference on Advances in Materials and Materials Processing, ICAMMP-iv, IIT Kharagpur, India, November 5-7, 2016.
24) Abul Hossain, Fahmida GULSHAN and ASW Kurny, Characterization of tensile fracture in heat treated Al-6Si-0.5Mg (-0.5Cu) automobile engine block alloy under different strain rates, Paper ID 201, 11th International Conference on Mechanical Engineering, ICME 2015, Dhaka.
23) Abul Hossain, Fahmida GULSHAN and ASW Kurny, Studies on tensile properties and fracture behavior of Al-6Si-0.5Mg (-Cu or/and Ni) alloys at various strain rates, Paper ID 210, 11th International Conference on Mechanical Engineering, ICME 2015, Dhaka.
22) Abul Hossain, Fahmida GULSHAN and ASW Kurny, Effects of inclusions on the mechanical properties of reinforced bars, Paper ID 295, 11th International Conference on Mechanical Engineering, ICME 2015 .
21) Abdullah Al Shafe, Fahmida GULSHAN, Sanjidah Akter Urmi, A. H. M. Azadur Rahman and ASW Kurny, Effect of Zr and Ti on microstructures and mechanical properties of as-cast Al-Mg alloys, 11th International Conference on Mechanical Engineering, ICME 2015 .
20) Md. Rabaiet Shattique, Fahmida GULSHAN and Abu Syed Wais Kurny, Building Bricks made of Fly-ash Mixed with sand of ceramic dust: A synthesis and a comparative study, Paper ID 91, International Conference on Materials and Manufacturing Engineering, (ICMME 2015), Dhaka.
19) Khan Mamun Reza, ASW Kurny and Fahmida GULSHAN, Photocatalytic degradation of Methylene Blue by Locally Available Magnetite, International Conference on Water Technology (ICWT), 2015 Paper ID M0010, Bangkok, Thailand
18) Sanjidah Akter Urmi, ASW Kurny and Fahmida GULSHAN, Decolorization of Methyl Orange using mill scale by Photo-Fenton reaction, Proceedings of 6th BSME International Conference on Thermal Engineering (ICTE), 2014 Paper ID: 117, Dhaka, Bangladesh [Later published in Procedia Engineering, Elsevier].
17) A. Hossain, M. A. Gafur, Fahmida GULSHAN, ASW Kurny, “Electrochemical investigation of corrosion behavior of Al-6Si-0.5Mg (-2Cu) alloys in 0.1M NaCl solution(simulated sea water)” Proceedings of the International Conference on Chemical Engineering 2014, ICChE2014, 29-30 December, Dhaka, Bangladesh [Paper ID: ICChE14102].
16) A. Hossain, R. Qadir, Fahmida GULSHAN, ASW Kurny, “Electrochemical investigation of corrosion behavior of Al-6Si-0.5Mg (-2Ni) alloys in o.1M NaCl solution(simulated sea water)” Proceedings of the International Conference on Chemical Engineering 2014, ICChE2014, 29-30 December, Dhaka, Bangladesh [Paper ID: ICChE14103].
15) M.A.K. Azad, S.S.S. Shean and Fahmida GULSHAN, Rapid Decolorization of Acid Orange II in Aqueous Solution by Waste Iron Oxide Particles, Proceedings of 2nd International Conference on Mechanical Engineering and Renewable Energy (ICMERE) 2014, Chittagong, Bangladesh.
14) Marzia H TANIA, ASW KURNY Fahmida GULSHAN, The prospect of Bipinganj silica sand in possible high-tech applications, Proceedings of 10th International Conference on Mechanical Engineering, ICME 2014, Dhaka, Bangladesh. [Later published in Procedia Engineering 90 (2014), pp. 172-175. DOI information: 10.1016/j.proeng.2014.11.832].
13) Md. Saiful Alam, Ignaas Verpoest and Fahmida GULSHAN, Characterization of Tensile Failure Behavior of Natural Single Fibre Composite by Acoustic Emission Technique, Abstract Book of International Conference on Physics for Energy and Environment, Atomic Energy Centre, p 58 Dhaka, 06-08 March, 2014
12) Ferdush Ara, Sabila Kader, ASW Kurny and Fahmida GULSHAN, Degradation of textile dyes using ZnO as photocatalyst, Abstract Book of International Conference on Physics for Energy and Environment, Atomic Energy Centre, p 33 Dhaka, 06-08 March,2014
11) Marzia H TANIA, ASW KURNY and Fahmida GULSHAN Characterization and Upgradation of Silica Sand of Sylhet, Abstract Book of International Conference on Physics for Energy and Environment, Atomic Energy Centre, p 32, Dhaka, 06-08 March,2014.
10) Sheik Md. Kazi Nazrul ISLAM, ASW KURNY and Fahmida GULSHAN, Photocatalytic Degradation of Methylene Blue by H2O2 and Oxalic Acid in Presence of Mill Scale, Proc. WasteSafe 2013, 3rd International Conference on Solid Waste Management in Developing Countries, Khulna University of Engineering Khulna, Bangladesh, pp 92-94, ISBN: 978-984-33-7045-7, February 10 – 12, 2013.
9) Tahmina BANU, Md. Muktadir BILLAH, Fahmida GULSHAN and A. S. W. KURNY, Experimental Investigations on Coal Fly Ash-Sand-Lime-Gypsum Structural Bricks, Proc. WasteSafe 2013, 3rd International Conference on Solid Waste Management in Developing Countries, Khulna University of Engineering Khulna, Bangladesh, pp 186-187, ISBN: 978-984-33-7045-7 February 10 – 12, 2013.
8) Fahmida GULSHAN, Mahbuba SULTANA, Md. Saiful ISLAM and ASW KURNY, Photocatalytic efficiency of waste iron oxide: Degradation of Methylene Blue, Proc. 3rd CUTSE Int Conf CUTSE 2011, Curtin University, Engineering and Science, Sarawak, , Nov 08-09, 2011, Malaysia
7) Fahmida GULSHAN and Kiyoshi OKADA: Textile dye decomposition by iron oxide in photo-ferrioxalate system, Abstract book of International Conference on Gender Participation in the Development of Science, 2009, Bangladesh.
6) Fahmida GULSHAN, Sayaka YANAGIDA, Yoshikazu KAMESHIMA, Akira NAKAJIMA and Kiyoshi OKADA: Photodecomposition of Methylene blue by iron-oxides in an oxalate solution; Abstract Book of 3rd International Conference on the Science and Technology for Advanced Ceramics, 16 (2009).Japan
5) Fahmida GULSHAN, Sayaka YANAGIDA, Yoshikazu KAMESHIMA, Akira NAKAJIMA and Kiyoshi OKADA: Chemically functional materials using ubiquitous components in the Fe2O3-Al2O3 system -Addition of oxalate-; Abstract Book of 47th Symposium on Basic Science of Ceramics, 552-553 (2009).Japan
4) Fahmida GULSHAN, Yoshikazu KAMESHIMA, Akira NAKAJIMA and Kiyoshi OKADA: Chemically functional materials using ubiquitous components - Fe2O3-Al2O3 system - Abstract Book of 46th Symposium on Basic Science of Ceramics, 546-547 (2008) Japan
3) Fahmida GULSHAN, Yoshikazu KAMESHIMA, Akira NAKAJIMA and Kiyoshi OKADA: Simultaneous ion uptake properties of Fe2O3-Al2O3 compounds prepared by coprecipitation method; Book of Abstracts Waste Eng08, 347-348 (2008). Greece.
2) Atsushi KOBAYASHI, Fahmida GULSHAN, Yoshikazu KAMESHIMA, Akira NAKAJIMA, Kiyoshi OKADA: Preparation and properties of CaO-Fe2O3-SiO2 compounds for recycling of steel slag, paper sludge and coal fly ash; Book of Abstract, R’07 World Congress, 64 (2007).Japan
1) Fahmida GULSHAN and Qumrul AHSAN “Inspection of white metal bonding on steel by ultrasonic testing” Proceedings of 9th Annual Paper Meet and 4th International Conf., The Institution of Engineers’, Bangladesh, Mechanical Engineering Division, 2003,Bangladesh.
Submitted Papers:
1) Fahmida Gulshan, Rejwanur Rahman, Md. Rubaiyat Mostofa, Md. Imran Noor, Rowshan Mamtaz, EXTRACTION OF TIN FROM WASTE PRINTED CIRCUIT BOARD IN HYDROMETALLURGICAL PROCESS, submitted to ICMSSD 2019, DU.
2) Abul Hossain, Sanjidha Akter Urmi, Fahmida Gulshan, ASW Kurny, Effect of Zr Addition on Microstructures and Mechanical Properties of As-cast Al-Mg Alloys, Submitted to ICME 2019, BUET.
3) Abul Hossain, Fahmida Gulshan, ASW Kurny Microstructures Modification of Al-Si-Mg (-Ni) Automobile Engine Block Alloys by Heat Treatment, Submitted to ICME 2019, BUET.
4) Ishmam Nihal, Imran Noor, Istiaque Mendares and Fahmida Gulshan, Recovery of Gold from Discarded RAM, submitted to ICMSSD 2019, DU.
5) Auditee Majumdera, Farhan Ishraka,Nahid Sultana Riaa, Fahmida Gulshan
DEVELOPMENT OF NON FIRED BRICK FROM LOCALLY PRODUCED ELECTRIC ARC FURNACE SLAG, submitted to ICCBM 2020, Rome, Italy
6) Nahid Sultana Riaa, Auditee Majumdera, Farhan Ishraka, Fahmida Gulshan, Utilization of Locally Produced Steel Slag as Building Material, submitted to ICMIME 2019, RUET, Rajshahi
7) Farhan Ishraka, Nahid Sultana Riaa, Auditee Majumdera, Fahmida Gulshan, UTILIZATION OF LOCALLY PRODUCED INDUCTION FURNACE SLAG AS BUILDING MATERIAL
8) Rejwanur Rahmana, Fahmida Gulshana ,Md. Imran Noora ,Md.Rubaiyat Mostofaa, Rowshan Mamtaz, RECOVERY OF COPPER FROM WASTE PRINTED CIRCUIT BOARD, submitted to ICMIME 2019, RUET, Rajshahi
Miscellaneous Publications:
4) Fahmida GULSHAN: Shothik rod nirbachon [in Bangla], Prothom Alo, Bangladeshi Daily Newspaper, Saturday, 3rd September 2016.
3) Fahmida GULSHAN: Secondary Steel processing in ladle refining furnaces, National seminar on Induction steel making organized by BSRM Limited, 27th June, 2015, Dhaka, Bangladesh.
2) Fahmida GULSHAN: Fatigue phenomenon in materials, national seminar on Fatigue Properties of Steel organized by BSRM Limited, 12th April, 2014, Dhaka, Bangladesh.
1)Fahmida GULSHAN: Ductility in steel reinforcement, National seminar on Capacity Based Design organized by BSRM Limited, 1st July, 2013, Dhaka, Bangladesh.