Md. Mahbubul Hasan

Md. Mahbubul Hasan

Assistant Professor (on leave)

Qualification: BSc
Phone: +1 530 219 2949

At present I am doing my PhD at University of California Davis, USA in the Materials Science and Engineering program. Earlier I completed my MSc as well as BSc on Materials and Metallurgical Engineering from Bangladesh University of Engineering & Technology at 2010 and 2008, respectively. After completion of my BSc Engineering I served the MME department, BUET for three and half years as a Lecturer and then as an Assistant Professor. At that time I worked as the secretary of the Board of Undergraduate Study (BUGS) and as a BRTC member of the department.

I was the Cultural and Literature Secretary of the BUET teachers’ Association during the year 2009. During undergraduate studies I have worked on Zirconia toughened Alumina (ZTA) Biomaterials. Here I have tried to optimize the process parameters to get desired mechanical properties. In M.Sc. research work I wanted to expose myself with modeling and simulation by realizing its necessity in Materials Science and I developed an Artificial Neural Network (ANN) model to predict the properties of ZTA from process parameters using MATLAB. Moreover, I have developed a semi-automatic technique to measure the grain size of material from microstructure using MATLAB.

Energetics of Radiation Tolerant Nanoceramics

1. Md. Mahbubul Hasan and A. K. M. Bazlur Rashid, “Microstructure and properties of Zirconia Toughened Alumina (ZTA) ceramics developed from nano-sized particles of monoclinic zirconia and alpha alumina”, Materials & Design (submitted)

2. Md. Mahbubul Hasan and A. K. M. Bazlur Rashid, “Application of Artificial Neural Network (ANN) to predict properties of Zirconia Toughened Alumina (ZTA) ceramics”, Materials & Design, (submitted)

3. Md. Mahbubul Hasan and Sudan Ahmed, “An easier semi-automatic technique for grain size measurement”, Materials & Design, (submitted)

Conference Proceedings: 1. M M Hasan, S Ahmed, A Sharif, “Coir Fibre as a Reinforcing Element: A Review”, 3rd Int. Con. on Structure, Processing and Properties of Materials (SPPM2010), Paper ID: E31, 2010.

2. M M Hasan, M F Islam, “Development of Acetabular Cup and Femoral Head of Human Hip Joint by Slip Casting Method using Zirconia Toughened Alumina (ZTA) Biomaterials”, 3rd Int. Con. on Structure, Processing and Properties of Materials (SPPM2010), Paper ID: D06, 2010.

3. M. M. Hasan and F. Islam, “Effect of Sintering Temperature and Time on Microstructure and Properties of Zirconia Toughened Alumina (ZTA)”, Advances in Sintering Science and Technology, Ceramic Transactions, 2008, Volume 209, Page 283.