Mahbub Hasan

Mahbub Hasan

Professor

Professor

Qualification: PhD
Phone: 5516 7100 Ext: 7498
mahbubh@mme.buet.ac.bd

Biography

PERSONAL INFORMATION Full Name: Mahbub Hasan
Current Position: Professor
Date of Birth: 09/09/1973
Mailing Address: Dept. of MME, BUET, Dhaka
Phone No: +8801820291811
Facsimile: +88029665618
E-mail: mahbubh@mme.buet.ac.bd
EDUCATION Degree Year Graduating

Institution

 Major
Ph.D. 2005 Dublin City University, Ireland Mechanical and Manufacturing Engineering
M.Sc. Engg. – – – – – –
B.Sc. Engg. 1999 BUET Metallurgical Engineering
EMPLOYMENT RECORD Designation with Institution Period
From To
Professor, MME, BUET 08/10/2017 To Date
Associate Professor, MME, BUET 21/09/2015 08/10/2017
Assistant Professor, MME, BUET 07/04/2009 20/09/2015
Lecturer, MME, BUET 17/11/2008 06/04/2009
Lecturer, UNIMAS, Malaysia 01/09/2006 16/11/2008

 

AWARDS
  • Universiti Malaya, Malaysia fellowship (May 2014 – April 2015)
  • Universiti Teknologi Malaysia fellowship (February 2013 – May 2013)
  • University scholarship (Ph.D. Programme), Dublin City University, Ireland (2000-2004)
PROFESSIONAL CONTRIBUTIONS
  • Member, Organizing committee of conference on “Advanced Material Processing Technology” 2003 organized by Department of Mechanical and Manufacturing Engineering, Dublin City University, Ireland
  • Coordinated a workshop on “Laboratory Safety” as Seminar Coordinator, 15 August   2007 organized by Faculty of Engineering, UNIMAS, Malaysia
  • Member, Organizing committee of symposium on “Academic Quality Assurance”, 31 October 2007, Organized by Faculty of Engineering, UNIMAS, Malaysia
  • Member, Organizing committee of conference on “Energy & Environment” December 2007 organized by Faculty of Engineering, UNIMAS, Malaysia
  • Member, Organizing committee of conference on “Structure, Processing and Properties of Materials” February 2010 organized by MME, BUET
  • Member, Organizing committee of seminar on “Selection of Materials and Heat-Treatment”, 20-21 July 2011, organized by MME, BUET
  • Member, Organizing committee of conference on “Structure, Processing and Properties of Materials” March 2018 organized by MME, BUET
  • Guest editor of International Journal of Polymer Science
  • Reviewer of ACS Sustainable Chemistry and Engineering, Carbohydrate Polymers, ACS Industrial Chemistry and Engineering Research, Journal of Thermoplastic Composites, Composites: Part A, Journal of Petroleum and Gas Engineering, Journal of Agricultural Science and Technology, Journal of Composite Materials, Bioresources, Journal of Scientific Research, International Journal of Mechanical and Materials Engineering, Journal of Polymer Research, Journal of Polymers and the Environment, International Journal of Precision Engineering and Manufacturing, International Journal of Engineering, Science and Technology, Journal of Physics and Chemistry of Solids, Fibers and Polymers, Polymer Composites, Journal of Plastic Film and Sheeting, Indian Journal of Engineering & Materials Sciences, Journal of Optoelectronics and Advanced Materials, International Journal of Polymer Science, Malaysian Polymer Journal, Science and Technology of Advanced Materials, Iranian Polymer Journal, Science and Engineering of Composite Materials, Advances in Materials and Processing Technologies, Materials Science and Materials Engineering, Advanced Power Technology, Advances in Polymer Technology, International Journal of Biological Macromolecules, Wood Material Science and Engineering, Journal of Vinyl and Additive Technology, International Journal of Nano and Biomaterial, Journal of Materials Research, International Journal of Polymer Science, International Journal of Performability Engineering, Open Journal of Organic Polymer Materials (OJOPM), Sains Malaysiana, Journal of Chemical Engineering and Materials Science, Advances in Materials and Processing Technologies, Macromolecular Symposia Journal of Materials Science: Materials in Electronics, Advances in Mechanical Engineering, Journal of Mechanical Engineering and Sciences, International Journal of Modern Science and Technology, Journal of Environmental Engineering and Landscape Management, Chemical Science International Journal, Maderas-Cienc Tecnol Journal, Advances in Chemistry, Journal of King Saud University-Engineering Sciences, International Research Journal of Pure and Applied Chemistry, Materials Chemistry and Physics, Polymer Engineering and Sciences, Cellulose, Daffodil International University Journal of Science and Technology, Current Journal of Applied Science and Technology, Journal of Bangladesh Academy of Science, Journal of Scientific Research and Reports, Biotechnology Journal International, International Journal of the Physical Sciences, Heliyon, Polymer Testing, Journal of Biology and Nature, Chemical Science International Journal, Bangladesh Army University of Engineering & Technology (BAUET) Journal, Asian Journal of Chemical and Physical Sciences, Journal of Biomaterials and Nanobiotechnology, Advances in Research, Advances in Materials Science and Engineering, High Temperature Materials and Processes, Journal of the Chinese Advanced Materials Society, Journal of Taibah University of Sciences, Engineering Optimization

Research

• Structural, thermal and mechanical characterization of raw and chemically treated natural fibers

• Manufacturing and characterization of raw and chemically treated natural fiber reinforced polymer matrix composites

Publications

PUBLICATIONS:

(a)     Journal Publications:

    1. B Sutradhar, M B Mesbah and M. Hasan, “Effect of Fiber Ratio and Chemical Treatment on Properties of Banana and Betel Nut Fiber Reinforced Hybrid Polypropylene Composites”, IOP Conf. Series: Materials Science and Engineering, 2018, 438 012006, doi:10.1088/1757-899X/438/1/012006
    2. Md R H Mazumder, F Numera, A Al-Asif and M. Hasan, “Mechanical Properties of Silk and Glass Fiber Reinforced Hybrid Polypropylene Composites”, IOP Conf. Series: Materials Science and Engineering, 2018, Vol. 438 012007, doi:10.1088/1757-899X/438/1/012007
    3. M M Rahman, M Mondol and M. Hasan, “Mechanical Properties of Chemically Treated Coir and Betel Nut Fiber Reinforced Hybrid Polypropylene Composites”, IOP Conf. Series: Materials Science and Engineering, 2018, 438 012025 doi:10.1088/1757-899X/438/1/012025
    4. M Akter, E Jahan and M. Hasan, “Mechanical, Thermal and Morphological Properties of Pineapple and Betel Nut Husk Fiber Reinforced Hybrid Polypropylene Composites”, IOP Conf. Series: Materials Science and Engineering, 2018, 438 012026 doi:10.1088/1757-899X/438/1/012026
    5. S Das, M Rahman and M. Hasan, “Physico-Mechanical Properties of Pineapple Leaf and Banana Fiber Reinforced Hybrid Polypropylene Composites: Effect of Fiber Ratio and Sodium Hydroxide Treatment”, IOP Conf. Series: Materials Science and Engineering, 2018, 438 012027 doi:10.1088/1757-899X/438/1/012027
    6. Md I Hossain and M. Hasan, “Mechanical, Morphological and Thermal Properties of Alkali Treated Ladies Finger Fiber Reinforced Polypropylene Composites”, IOP Conf. Series: Materials Science and Engineering, 2018, 438 012028 doi:10.1088/1757-899X/438/1/012028
    7. J Tusnim, N S Jenifar and M. Hasan, “Properties of Jute and Sheep Wool Fiber Reinforced Hybrid Polypropylene Composites”, IOP Conf. Series: Materials Science and Engineering, 2018, 438 012029 doi:10.1088/1757-899X/438/1/012029
    8. M. Rahman, S. Das and M. Hasan, “Mechanical Properties of Chemically Treated Banana and Pineapple Leaf Fiber Reinforced Hybrid Polypropylene Composites”, Advances in Materials and Processing Technologies, 2018, DOI: 10.1080/2374068X.2018.1468972
    9. M. M. Hauque and M. Hasan, “Influence of Fiber Surface Treatment on Physico-Mechanical Properties of Betel Nut and Glass Fiber Reinforced Hybrid Polyethylene Composites”, Advances in Materials and Processing Technologies, 2018, DOI: 10.1080/2374068X.2018.1465322
    10. M. Rahman, S. Das, and M. Hasan, “Effect of Alkali Treatment on Properties of Pineapple Leaf Fiber and Banana Fiber”, Bangladesh Army University of Engineering & Technology (BAUET) Journal, 2018, Vol. 1, Issue 2, pp. 31-36
    11. S. Ahmed, A. Ahsan and M. Hasan, “Physico-Mechanical Properties of Coir and Jute Fiber Reinforced Hybrid Polyethylene Composites”, International Journal of Automotive and Mechanical Engineering, 2017, Vol. 14, Issue 4, pp. 4665-4674
    12. M. Hasan, Md. I, Hossain and S. Nahar, “Physico-Thermal Properties of Chemically Treated Ladies Finger Natural Fiber”, Bangladesh Army University of Engineering & Technology (BAUET) Journal, 2017, Vol. 1, Issue 1, pp. 19-24
    13. E. Jahan, M. Akter and M. Hasan, ” Morphology and Thermal Properties of Alkali Treated Pineapple Leaf Natural Fiber and Betel Nut Husk Natural Fiber”, Bangladesh Army University of Engineering & Technology (BAUET) Journal, 2017, Vol. 1, Issue 1, pp. 163-168
    14. Md. S. Islam, I. B. Ramli, M. R. Hasan, Md. M. Islam, Kh. N. Islam, M. Hasan and A. S. Harmaen, “Effect of Kenaf and EFB Fiber Hybridization on Physical and Thermo-Mechanical Properties of PLA Biocomposites”, Fibers and Polymers, 2017, Vol. 18, Issue 1, pp. 116-121
    15. S. Shahinur, M. Hasan and Q. Ahsan, “Effect of Rot Retardent Treatment on Properties of Jute Fibers”, Journal of Natural Fibers, 2017, Vo. 14, Issue 2, pp. 205-216
    16. S. Shahinur, M. Hasan, Q. Ahsan and S. Jafrin, “Physical and Mechanical Properties of Chemically Treated Jute Fiber Reinforced MAgPP Green Composites”, Applied Mechanics and Materials, 2016, Vol. 160, pp. 134-139
    17. M. A. H. Ibrahim, A. Hassan, M. U. Wahit, M. Hasan, and M. Mokhtar, “Mechanical Properties and Morphology of Polypropylene/Poly(Acrylonitrile-Butadiene-Styrene)Nanocomposites: Effect of Compatibilizer and Montmorillonite Content” , Journal of Elastomers and Plastics, 2016, DOI: 10.1177/0095244316644859
    18. M. M. Haque, and M. Hasan, “Mechanical Properties of Betel Nut and Glass Fibre Reinforced Hybrid Polyethylene Composites” International Journal of Automotive and Mechanical Engineering, 2016, Vol. 13, Issue 3, pp. 3763-3772
    19. S. M. Islam, Z. A. Talib,  M. Hasan, I. Ramli, M. K. M. Haafiz, M. Jawaid, A. Islam and I. M. Inuwa, “Evaluation of Mechanical, Morphological and Biodegradable Properties of Hybrid Natural Fiber Polymer Nanocomposites”, Polymer Composites, 2015, DOI 10.1002/pc.23616
    20. J. C. Lai, A. Hassan,  M. Hasan, F. N. Ani, and F. A. Tanjung, “Heat Distortion Temperature and Mechanical Properties of Agricultural Wastes-Reinforced  Phenolic Composites”, Journal of Polymer Engineering, 2015, DOI 10.1515/polyeng-2015-0259
    21. S. Shahinur, M. Hasan, Q. Ahsan, D. K. Saha and Md. S. Islam, “Characterization on the Properties of Jute Fiber at Different Portions”, International Journal of Polymer Science, 2015, Article ID 262348
    22. Md. S. Islam, A. Covalcik, M. Hasan and V. K. Thakur, “Natural Fiber ReinforcedPolymer Composites”, International Journal of Polymer Science, 2015, Article ID 813568
    23. W. H. Haniffah, I. B. Ramli, K. Abdan, M. Khalid, M. Hasan and M. E. Hoque, “KenafFibre Reinforced Polypropylene Composites: Effect of Cycle Immersion on Tensile Properties”, International Journal of Polymer Science, 2015, Article ID 872387
    24. A. Azali, S. M. Sapuan, S. A. Rahman, N. M. Adam, M. Hasan and M. E. Hoque,“Temperature Profile of Produced Gas in Oil Palm Biomass Fluidized Bed Gasifier: Effect of Fibre/Shell Composition Ratio”, Bioprocessing &Biotechniques, 2015, Vol. 5, Issue 8, pp. 1-6

 

  • A. Hassan, L. Y. Hau and M. Hasan, “Effect of Ammonium Polyphosphate on Flame Retardency,  Therma Stability and Mechanical Properties of UnsaturatedPolyester/Phenolic/Montmorillonite Nanocomposites”, Advances in Polymer Technology, 2015, DOI 10.1002/adv.21605

 

    1. S. Biswas, S. Shahinur, M. Hasan and Q. Ahsan, “Physical, Mechanical and Thermal Properties of Jute and Bamboo Fiber Reinforced Unidirectional Composites”, Procedia Engineering, 2015, Vol. 105, pp. 933-939
    2. Md. S. Islam, N. A. B. Hasbullah, M. Hasan, Z. A. Talib, M. Jawaid and M. K. M. Haafiz, “Physical, Mechanical and Biodegradable Properties of Kenaf/Coir Hybrid Fiber Reinforced Polymer Nanocomposites”, Materials Today Communications, 2015, Vol. 4, pp. 69-76

 

  • S. S. Mir, M. Hasan, S. M. N. Hasan, Md. J. Hossain and N. Nafsin, “Effect of Chemical Treatment on the Properties of Coir Fiber Reinforced Polypropylene and Polyethylene Composites,Polymer Composites, 2015, DOI: 10.1002/pc.23690

 

  1. J. C. H. Lai, Md. R. Rahman, S. Hamdan, M. Hasan, L. F. Kiew, Md. M. Rahman, Md. F. Hossen, “Thermomechanical Performance and High Brunauer-Emmett-Teller Surface Area Poly(vinyl alcohol)/Silica/Clay and  Poly(vinyl alcohol)/(Fumed Silica)/Clay Nanocomposites”, Journal of Vinyl and Additive Technology, 2015, DOI: 10.1002/vnl.21513
  2. F. A. Tanjung, A. Hassan, M. Hasan, “Use of Epoxidized Natural Rubber as a Toughening Agent in Plastics”, Journal of Applied Polymer Science, 2015, Vol. 132, Issue 29, DOI: 10.1002/APP.42270
  3. Md. R. Rahman, S. Hamdan, M. Hasan, R. Baini. A. A. Salleh, “Physical, Mechanical, and Thermal Properties of Wood Flour Reinforced Maleic Anhydride Grafted Unsaturated Polyester (UP) Biocomposites”, BioResources, 2015, Vol. 10, Issue 3, pp. 4557-4568
  4. S. S. Latif, S. Nahar and M. Hasan, “Mechanical and Electrical Resistivity of Bamboo Fiber Reinforced Polypropylene Composites”, Journal of Polymer Materials, 2015, Vol. 32, Issue 1, pp. 89-96
  5. S. S. Latif, S. Nahar and M. Hasan, “Fabrication and Electrical Characterization of Bamboo Fiber Reinforced Polypropylene Composite”, Journal of Reinforced Plastics and Composites, 2015, Vol. 34, Issue 3, pp. 187-195
  6. Md. S. Islam, M. B. Ahmad, M. Hasan, S. A. Aziz. M. Jawaid, M. K. M. Haafiz and S. A. Z. Zakaria, “Natural Fiber-Reinforced Hybrid Polymer Nanocomposites: Effect of Fiber Mixing and Nanoclay on Physical, Mechanical and Biodegradable Properties”, BioResources, 2015, Vol. 10, Issue 1, pp. 1394-1407
  7. F. Shukor, A. Hassan, Md. S. Islam, M. Mokhtar and M. Hasan, “Effect of Ammonium Phosphate on Flame Retardancy, Thermal and Mechanical Properties of Alkali Treated Kenaf Fiber Filled PLA Biocomposites”, Materials and Design, 2014, Vol. 54, pp. 425-429
  8. F. Shukor, A. Hassan, M. Hasan, Md. S. Islam and M. Mokhtar, “PLA/Kenaf/APP Biocomposites: Effect of Alkali Treatment and Ammonium Polyphosphate (APP) on Dynamic Mechanical and Morphological Properties”, Polymer-Plastics Technology and Engineering, 2014, Vol. 53, pp. 760-766
  9. S. Sidika, F. Mansura, M. Hasan and A. Hassan, “Effect ofReinforcement and Chemical Treatment of Fiber onthe Properties of Jute-Coir Fiber Reinforced Hybrid PolypropyleneComposites”,Fibers and Polymers, 2014, Vol. 15, Issue 5, pp. 1023-1028
  10. J. Jamarosliza, M. Hasan, A. Hassan, N. A. Ibrahim, M. Ahmad, Z. A. Rahman and W. Md. Z. W. Yunus, “Effect of Reaction Condition on Thermal Stability of Polystyrene Grafted Oil Palm Empty Fruit Bunch (OPEFB) Fiber”, Journal of Polymer Engineering, 2014, Vol. 34, Issue 2, pp. 185-191
  11. M. E. Ali, Z. Sultana, M. S. Uddin, S. A. Mamun. M. Haque and M. Hasan, ‘Effect of Chemical Treatment on Palm Fiber Reinforced Polypropylene Composites”, International Journal of Materials and Product Technology, 2014, Vol. 48, pp. 3-17
  12. Md. S. Islam, S. Hamdan, M. Hasan, A. Hassan, M. K. M.  Haafiz and M. Jawaid, “The Effect of PVA-co-MMA Copolymer on the Physical, Mechanical and Thermal Properties of Tropical Wood Materials”, Advances in Materials Science and Engineering, 2014, Vol. 2014,Paper ID 626850
  13. S. S. Mir, N. Nafsin, M. Hasan, N. Hasan and A. Hassan “Improvement of the Properties of Coir-Polypropylene Biocomposites by Fiber Treatment”,Materials and Design, 2013, Vol. 52, pp. 251-257
  14. S. Biswas, Q. Ahsan, A. Cenna,M. Hasan and A. Hassan, “Physical and Mechanical Properties of Jute, Bamboo and Coir Natural Fiber”,Fibers and Polymers, 2013, Vol. 14, Issue 10, pp. 1762-1767
  15. R. Karim, Md. F. Rahman, M. Hasan, Md. S. Islam and A. Hassan “Effect of Fiber Loading and Alkali Treatment onPhysical and Mechanical Properties of Chemically Treated Bagasse Fiber Reinforced Polypropylene Composites”,Journal of Polymer Materials, 2013, Vol. 30, Issue 4, pp. 423-433
  16. S. I. Hossain, M. Hasan, Md. N. Hasan and A. Hassan, “Effect of Chemical Treatment on Physical, Mechanical and Thermal Properties of Ladies Finger Natural Fiber”, Advances in Materials Science and Engineering, 2013, Vol. 2013, Paper ID 824274
  17. Z. Zakaria, Md. S. Islam, A. Hassan, M. K. M. Haafiz, R. Arjmandi, I. M. Inuwa and M. Hasan, “Mechanical Properties and Morphological Characterization of PLA/Chitosan/Epoxidized Natural Rubber Composites”, Advances in Materials Science and Engineering, 2013, Vol. 2013, Paper ID 629092
  18. M. E. Ali, Z. Sultana, M. S. Uddin, S. A. Mamun, M. Haque and M. Hasan, “Effect of Hydrazine Post Treatment on Natural Fiber Reinforced Polymer Composites”, Materials Research Innovation, 2013, Vol. 17, pp. S2 19-26
  19. S. Nahar and M. Hasan,“Effect of Mimosa Grafting on Anatomy, Chemical Composition and Tensile Properties of Bamboo Fiber”, Engineering Journal, 2013, Vol. 17, Issue 2, pp. 39-49
  20. S. Nahar and M. Hasan, “Effect of Chemical Composition, Anatomy and Cell Structure on Tensile Properties of Bamboo Fiber”, Engineering Journal, 2013, Vol. 17, Issue 1, pp. 61-68
  21. S. Sidika, F. Mansura and M. Hasan, “Physico-Mechanical Properties of Jute-Coir Fiber Reinforced Hybrid Polypropylene Composites”,World Academy of Science, Engineering and Technology, 2013, Vol. 73, pp. 1145-1149
  22. Md. S. Islam, S. Hamdan, M. Hasan, Md. Rusop, Md. R. Rahman and M. A. M. Md. Idrus, “Physico-mechanical and Decay Resistance Properties of Chemically Modified Tropical Wood Material”,Journal of Applied Polymer Science, 2013,Vol. 127, Issue 3, pp. 1555-1560
  23. S. Shahinur, M. Hasan and Q. Ahsan, “Outcome of Rot Retardant Treatment on the Mechanical Properties of Different Portion Jute Fiber”, Bangladesh Journal of Physics, 2013,Vol. 13, pp. 59-64
  24. Md. S. Islam, S. Hamdan, M. Hasan, Md. S. Ahmed and Md. R. Rahman, “Effect of Coupling Reaction onMechanical and Biological Properties of Tropical Wood Polymer Composites (WPC)”, International Biodeterioration and Biodegradation, 2012, Vol. 72, pp. 108-113
  25. S. S. Mir, S. M. N. Hasan, Md. J. Hossain and M. Hasan, “Chemical Modification Effect on the Mechanical Properties of Coir Fiber, Engineering Journal, 2012, Vol. 16, Issue 2, pp. 73-83
  26. S. Biswas, Q. Ahsan, I. Verpoest and M. Hasan, “Effect of Span Length on the Tensile Properties of Natural Fibers”, Advanced Materials Research, 2011, Vol. 264-265, pp. 445-450
  27. S. K. Shaha, S. Dyuti, Q. Ahsan and M. Hasan, “A Study on the Tensile Property of Jute Yarns Using Weibull Distribution”, Advanced Materials Research, 2011, Vol. 264-265, pp. 1917-1921
  28. S. K. Shaha, S. Dyuti, Q. Ahsan and M. Hasan, “Effect of Alkali Treatment on Surface Morphology and Properties of Jute Yarns”, Advanced Materials Research, 2011, Vol. 264-265, pp. 1922-1927
  29. S. K. Shaha, A. S. W. Kurny, M. Hasan and S. Dyuti, “Al-4.5 Cu-3.8 Fe In-Situ Composites: Effect of Rolling on Microstructure and Wear Properties”, Advanced Materials Research, 2011, Vol. 264-265, pp. 1939-1943
  30. S. Hamdan, M. Hasan, A. A. Hamdan and M. R. Rahman, “Physico-Mechanical Properties of Oil Palm Empty Fruit Bunch (OPEFB) Fiber Reinforced Polyethylene Composites” ASEAN Journal on Science and Technology for Development, 2011, Vol. 28, Issue 1, pp. 71-80
  31. S. M. Sadaf, M. Siddik, Q. Ahsan and M. Hasan, “Physical and Mechanical Properties of Jute Mat Reinforced Epoxy Composites” ASEAN Journal on Science and Technology for Development, 2011, Vol. 28, Issue 2, pp. 115-121
  32.  S. Hamdan, Y. L. Liew, M. Hasan and Z. A. Talib, “Studies of Monomer Impregnation and Polymerized In-Situ in Wood Using Dynamic Mechanical Thermal Analyzer”, Materials Science and Technology, 2011, Vol. 27, Issue 1, pp. 40-43
  33. S. K. Shaha, A. S. W. Kurny and M. Hasan, “Effect of Rolling and Heat Treatment on Microstructure and Wear Properties of Al-4.5Cu-3.8Fe In-Situ Composites”,ASEAN Journal on Science & Technology for Development, 2010, Vol. 27, Issue 1, pp. 11-20
  34. S. Hamdan, M. Hasan and Y. Nohe, “Measurement of Bending Properties of Rhizophora Tropical Wood”, ASEAN Journal on Science & Technology for Development, 2010, Vol. 26, Issue 2, pp. 75-86
  35.  S. Hamdan, M. Hasan and C. M. Yew, “Deformation of Wood in Compression During Moisture Movement”, ASEAN Journal on Science & Technology for Development, 2010, Vol. 26, Issue 2, pp. 1-9
  36.  M. M. Haque, M. N. Islam, M. Hasan, M. S. Islam, M. S. Islam and M. M. Huque, “Coir Fiber Reinforced Polypropylene Composites: Physical and Mechanical Properties”, Advanced Composite Materials, 2010, Vol. 19, pp. 91-106
  37.  M. M. Haque, M. S. Islam, M. S. Islam, M. N. Islam, M. M. Huque and M. Hasan, “Physico-Mechanical Properties of Chemically Treated Palm Fiber Reinforced Polypropylene Composites”, Journal of Reinforced Plastics and Composites, 2010, Vol. 29, Issue 11, pp. 1734-1742
  38.  M. M. Haque, M. R. Rahman, M. N. Islam, M. M. Huque, and M. Hasan, “Physico-Mechanical Properties of Polypropylene Composites Reinforced with Chemically Treated Coir and Abaca Fiber”, Journal of Reinforced Plastics and Composites, 2010, Vol. 29, Issue 15, pp. 2253-2261
  39.  Y. Sedik, S. Hamdan, I. Jusoh and M. Hasan, “Acoustic Properties of Selected Tropical Wood Species”, Journal of Nondestructive Evaluation, 2010, Vol. 29, pp. 38-42
  40.  M. R. Rahman, M. Hasan, M. M. Huque and M. N. Islam, “Physico-Mechanical Properties of Jute Fiber Reinforced Polypropylene Composites”, Journal of Reinforced Plastics and Composites, 2010, Vol. 29, Issue 3, pp. 445-455
  41. M. R. Rahman, S. Hamdan, M. Hasan and Z. A. Talib, “Structural Analysis and Dynamic Young’s Modulus Measurement of Selected Tropical Wood Polymer Composites (WPC)”, Materials Science and Technology, 2010, Vol. 26, Issue 9, pp. 1073-1078
  42. S. Hamdan, Y. Sedik, I. Jusoh, M. Hasan and Z. A. Talib, “Dynamic Young’s Modulus of Selected Tropical Wood Species”, Materials Science and Technology, 2009, Vol. 25, Issue 6, pp. 805-808
  43.  M. R. Rahman, M. M. Huque, M. N. Islam and M. Hasan, “Mechanical Properties of Polypropylene Composites Reinforced with Chemically Treated Abaca”, Composites A: Applied Science & Manufacturing, 2009, Vol. 40, pp. 511-517
  44.  M. R. Rahman, M. M. Huque, M. N. Islam and M. Hasan, “Physico-Mechanical Properties of Maleic Acid Post Treated Jute Fiber Reinforced Polypropylene Composites”, Journal of Thermoplastic Composite Materials, 2009, Vol. 22, pp. 365-381
  45.  M. M. Haque, M. Hasan, M. S. Islam and M. E. Ali, “Physico-Mechanical Properties of Chemically Treated Palm and Coir Fiber Reinforced Polypropylene Composites”, Bioresource Technology, 2009, Vol. 100, pp. 4903-4906
  46. M. Hasan, J. Stokes, L. Looney and M. S. J. Hashmi, “Deposition and Characterization of HVOF Sprayed Functionally Graded Coatings Deposited onto Lightweight Materials”, Journal of Materials Engineering and Performance, 2009, Vol. 18, Issue 1, pp. 66-69
  47. M. Hasan, J. Stokes, L. Looney and M. S. J. Hashmi, “Design and Optimisation of a

Multi-Powder HVOF Deposition Process”, Journal of Surface & Coatings Technology, 2008, Vol. 202, Issue 14, pp. 3215-3220

  1. M. Hasan, J. Stokes, L. Looney and M. S. J. Hashmi, “Effect of Spray Parameters on Residual Stress Build-Up of HVOF Sprayed Aluminium/Tool-Steel Functionally Graded Coatings”, Journal of Surface & Coatings Technology, 2008, Vol. 202, Issue 16, pp. 4006-4010
  2. M. R. Rahman, M. M. Huque, M. N. Islam and M. Hasan, “Improvement of Physico-Mechanical Properties of Jute Fiber Reinforced Polypropylene Composites by Post Treatment”, Composites A: Applied Science & Manufacturing, 2008, Vol. 39, pp. 1739-1747

 

(b)     Proceeding Publications:

  1. S. I. Hossain and M. Hasan, “Structural Analysis and Mechanical Testing of Single Fiber from Ladies Finger Plant”, International Conference on Mechanical, Industrial and Materials Engineering 2013 (ICMIME2013), RUET, Rajshahi, Bangladesh, 2013, pp. 595-599
  2.  N. Nafsin and M. Hasan, “Manufacturing and Characterization of Coconut Fiber Reinforced Polypropylene Composite”, Proceedings of the 8th Asian-Australasian Conference on Composite Material (ACCM-8), Kuala Lumpur, Malaysia, 2012, Paper ID: O-NAT-238
  3. S. Siddika, F. Monsura and M. Hasan,“Mechanical Properties of Jute-Coir Fiber Reinforced Hybrid Polypropylene Composites”, Proceedings of the Pub7th CUTSE Conference: Engineering Goes Green, Curtin University, Miri, Malaysia, 2012, pp. 268-270
  4. S. Shahinur, M. Hasan and Q. Ahsan, “Thermal Characterization of Fire Retardant Treated Jute Fiber”, Proceedings of the 6th International Mechanical Engineering Conference, Institute of Engineers Bangladesh, 2012, Paper ID: IMEC and APM HT 15
  5.  S. S. Mir, S. M. N. Hasan, Md. J. Hossain and M. Hasan, “Characterization of Single Coir Natural Fiber, Proceedings of 3rd International Conference on Chemical Engineering, Dhaka, Bangladesh, 2011, pp. 79-83
  6.  S. Shahinur, M. Hasan and Q. Ahsan, “Effect of Chemical Retardant Treatment on Physico-Mechanical Properties of Jute Fiber Reinforced MAgPP Green Composites, Proceedings of International Symposium on Green Manufacturing and Application, Republic of Korea, 2011, Paper ID B5_5
  7.  S. J. Ahmed, Q. Ahsan and M. Hasan, “Development of Vacuum Assisted Resin Infusion (VARI)  Molding Technology for Thermoset Based Polymer Matrix Composite with Locally Available Resources”, Proceeding of the International Conference on Mechanical Engineering, Dhaka, Bangladesh, 2011, Paper ID ICME11-AM-017
  8.  N. Nafsin and M. Hasan, “Characterization of Single Coir Fiber for Preparing Polymer Matrix Composites”, Proceeding of the International Conference on Mechanical Engineering, Dhaka, Bangladesh, 2011, Paper ID ICME11-AM-020
  9.  S. Shahinur, Q. Ahsan, M. Hasan and D. K. Shaha, “Thermal Behavior of Water Retardant Treated Jute Fibers”, Proceeding of the International Conference on Mechanical Engineering, Dhaka, Bangladesh, 2011, Paper ID ICME11-TH-009
  10. S. K. Shaha, M. M. Haque and M. Hasan, “Simulation of Casting Solidification and ItsVerification on Structure and Property of Fe-C-Al Cast Iron”, Proceedings of the Third International Conference on Structure, Processing and Properties of Materials, Dhaka, Bangladesh, 2010, Paper ID A06
  11. S. K. Shaha, M. M. Haque and M. Hasan, “Effect of Austempering Time on the Structure and Properties of Fe-C-Al alloy System Ductile Cast Iron”, Proceedings of the Third International Conference on Structure, Processing and Properties of Materials, Dhaka, Bangladesh, 2010, Paper ID A07
  12.  S. Biswas, R. Hossain, Q. Ahsan, M. Hasan,A. V. Vuure and I. Verpoest,“Study on Physico-Mechanical Properties of Jute Fiber Reinforced Polymer Composites”, Proceedings of the Third International Conference on Structure, Processing and Properties of Materials, Dhaka, Bangladesh, 2010, Paper ID E04
  13.  Md. F. Rahman, R. Karim, M. Hasanand Q. Ahsan,“Physical and Mechanical Characterization of Single Bagasse Fiber”, Proceedings of the Third International Conference on Structure, Processing and Properties of Materials, Dhaka, Bangladesh, 2010, Paper ID E30
  14. S, Shahinur, Q. Ahsan, M. Hasanand S. Jafrin, “Characterization of CuSO4 (Rot Proof) Treated Jute Fiber”, Proceedings of the Third International Conference On Structure,Processing and Properties of Materials, Dhaka, Bangladesh, 2010, Paper ID E32
  15. Md. M. H. Khan, Q. Ahsan, M. Hasanand S. Jafrin, “Effect of Time and Temperature on Aluminisation of Steel”, Proceedings of the Third International Conference on Structure, Processing and Properties of Materials, Dhaka, Bangladesh, 2010, Paper ID G11
  16. K. C. Lai, A. R. H. Rigit, D. B. L. Bong, M. Hasan, M. Sawawi and M. S. Osman, “Thermal Imaging of Dielectric Barrier Discharge Plasma Actuator Panels,” Proceedings of International Symposium on Electro-hydrodynamics, UNIMAS, Kota Samarahan, Sarawak, Malaysia, 2009, Paper ID A5
  17. M. Hasan, Md. N. Haque, and A. S. M. A. Haseeb, “Wear Properties of Jute Fiber Reinforced Polymer Composites”, Proceedings of International Conference on Science & Technology, Pulau Pinang, Malaysia, 2008, pp. 643-648
  18. S. Hamdan, Md. R. Rahman,M. Hasan and Z. A. Talib, “Characterization of Selected Wood Polymer Composite (WPC)”, Proceedings of International Conference on Science & Technology, Pulau Pinang, Malaysia, 2008, pp. 581-587
  19. M. Hasan, S. Hamdan, A. Piee, A. Z. Hamdan and Md. R. Rahman, “Microstructural Analysis and Flexural Testing of Chemically Treated Palm Fiber Reinforced Polymer Composites”, Proceedings of International Conference on Science & Technology, Pulau Pinang, Malaysia, 2008, pp. 574-579
  20. K. A. Mamun, S. Hasan, M. Hasan, M. S. J. Hashmi and J. Stokes, “Designing and Integrating a Semi Automated Powder Feed Device to Produce Functionally Graded Materials (FGM) Using the HVOF Thermal Spray Process”, Proceedings of International Thermal Spray Conference, Netherland, 2008, pp. 663-668
  21. M. Hasan, S. Hamdan and T. C. Min, “Non-Destructive Testing of Fiber Reinforced Epoxy Composites Immersed in Seawater”, Proceedings of 3rd Brunei International Conference on Engineering and Technology, Brunei Darussalam, 2008, Paper ID ME11
  22. S. Hamdan, M. Hasan and C. C. Keong, “Compression Bending of Heat treated Glass FibreReinforced Polymer Composites”, Proceedings of the 24th International Manufacturing Conference, Waterford, Ireland, 2007, pp 429-436
  23. M. Hasan, S. F. Salleh and N. A. Halim, “Comparative Study of a Few Biomass Wastes  as Potential Renewable Energy Resources”, Proceedings of the International Symposium of Environment & Green Chemistry, 12th Asian Chemical Congress, Kuala Lumpur, Malaysia, 2007, Vol. 1, pp. 69-76
  24. A. R. M. Amin, M. Hasan and L. Y. Han, “Design and Fabrication of a Pepper Solar Tumble Dryer”, Proceedings of Malaysia Japan International Symposium on Advanced Technology 2007, Kuala Lumpur, Malaysia, Paper ID MJISTA139
  25. M. Hasan, S. F. Salleh and R. John, “Computational Fluid Dynamics (CFD) Simulation of a Downdraft Gasifier Using Wood Residue as Biomass Fuel”, Proceedings of 1st Engineering Conference on Energy & Environment, Kuching, Sarawak, Malaysia, 2007, pp. 251-255
  26. A. R. M. Amin, M. Hasan and O. T. Wee, “Design Enhancement & Testing of a Pepper Solar Tumble Dryer Using a Biomass Back-Up Heater”, Proceedings of 1st Engineering Conference on Energy & Environment, Kuching, Sarawak, Malaysia, 2007, pp. 289-292
  27. R. M. Amin, M. Hasan and N. O. C. Tsien, “Control and Testing of a Pepper Solar Tumble Dryer”, Proceedings of 1st Engineering Conference on Energy & Environment, Kuching, Sarawak, Malaysia, 2007, pp. 434-437
  28. S. Hamdan, M. Hasan and C. D. Sing, “Comparative Study of Thermal Properties of Tile and Granite Using Thermography”, Proceedings of 1st Engineering Conference on Energy & Environment, Kuching, Sarawak, Malaysia, 2007, pp. 278-284
  29. S. Ahmed, E. Ahmed, M. Hasan and S. Hamdan, “Prospects of Biogas Production Utilizing the Sewage Waste Water”, Proceedings of 1st Engineering Conference on Energy & Environment, Kuching, Sarawak, Malaysia, 2007, pp. 256-258
  30. M. Hasan, J. Stokes, L. Looney and M. S. J. Hashmi, “Determination of Residual Stress of HVOF Thermal Sprayed Aluminium/Tool-Steel Functionally Graded Coatings”, Proceedings of the 21st International Manufacturing Conference, Limerick, Ireland, 2004, pp. 299-304

 

(c)    Book Chapter:

  1. M. Hasan, A. Hassan and Z. Zakaria, “Poly(Lactic Acid) Hybrid Green Composites” in Biodegradable Green Composites, John Wiley & Sons, USA, 2016, pp. 149-166
  2. M. A. Rahman, F. Parvin, M. Hasan and M. E. Hoque, “Introduction to Manufacturing of Natural Fibre-Reinforced Polymer Composites” in Manufacturing of Natural Fibre-Reinforced Polymer Composites, Springer, Switzerland, 2015, pp. 17-43
  3. M. Hasan, M. E. Hoque, S. S. Mir, N. Saba and S. M. Sapuan, “Manufacturing of Coir Fibre-Reinforced Polymer Composites by Hot Compression Technique” in Manufacturing of Natural Fibre-Reinforced Polymer Composites, Springer, Switzerland, 2015, pp. 309-330
  4. Md. S. Islam,M. Hasan and M. H. A. Ayob, “Chemical Modification and Properties of Cellulose-Based Polymer Composites” in Lignocellulosic Polymer Composites: Processing, Characterization, and Properties, Scrivener Publishing LLC, USA, 2014, pp. 301-324
  5. M. Hasan, M. E. Hoque and S. M. Sapuan, “Application of Artificial Neural Network in Composite Materials” in Composite Materials Technology, CRC Press, USA, 2010, pp. 1-10

 

(d)    Patent:

  1. J. Stokes, L. Looney, M. S. J. Hashmi, M. Hasan, M. Tyrrell, “Deposition of Powders”, Patent Publication Number WO2008056345, 13 May 2009

Events

ID Event Name Duration Start Date
PG Seminar for Newly Admitted Students April 2024 Semester 21SEP2024 2 Hours September 21, 2024
PG April 2022 Semester Seminar on Rules and Regulations 1 Hours June 22, 2022
PG Seminar on Rules and Regulations 1 Hours August 11, 2021